LABORIE AQUARIUS XT/CT/LT/CTS Service Manual
LBL-000233
[B]
51
Symptom(s)
Possible Cause(s)
Check/Corrective Action(s)
EVENTS
A “transducer
change” event is
marked on the graph?
Cable
connected/disconnected
from device?
This action is marked on the graph to help distinguish it from
an actual signal received during testing. It is also marked when
the ROAM™ DX device goes through an auto-recovery
process.
SOFTWARE ERROR MESSAGES - iList Reporter
Error message: “Error
Code: 66a (Can't
install KB2160841)”
appears?
.NET Framework file
needs repair.
To repair .NET Framework File:
4.
Click Start > Control Panel > and double-click Add or
Remove Programs.
Alternatively, click Start > Control
Panel > Programs > Programs and Features.
5.
In the resulting list, right-click the
Microsoft .NET
Framework 4 Client Profile file and select Change or
select Uninstall/Change.
6.
Select to Repair the file and wait for the repair to
complete before continuing.
7.
Restart the computer.
UDS report not
transferring to i-LIST
Office Reporter?
Make sure i-LIST
MsgQListener is running.
To Check MsgQListener:
8.
Close all open programs.
9.
Make sure i-LIST Message Queue Listener is running by
clicking Start > Programs > Laborie > i-LIST
MsgQListener.
10.
Restart the computer and attempt to send a report to i-
LIST Office Reporter. If unsuccessful try the solution
below.
Install Windows Updates
To Install Windows Updates:
11.
Close all open programs.
12.
Click Start > Control Panel and double-click Windows
Updates -OR- Click Start > All Programs > Windows
Updates. If there are updates waiting for installation,
install them and then restart the computer.
13.
Once restarted, attempt to send a report to i-LIST
Office Reporter. If unsuccessful try the following
solution to repair the .NET file.
Repair .NET Framework
File
To repair .NET Framework:
14.
Click Start > Control Panel > and double-click Add or
Remove Programs.
Alternatively, click Start > Control
Panel > Programs > Programs and Features.
15.
In the resulting list, right-click the
Microsoft .NET
Framework 4 Client Profile file and select Change OR
select
Uninstall/Change
16.
Select to Repair the file and wait for the repair to
complete.
17.
Restart the computer and continue with sending a UDS
report to i-LIST Office Reporter.
