background image

    

 14.  

 CARE & MAINTENANCE

Prima C/ Prima CS COLPOSCOPE 

Surgical Microscope Maintenance/Servicing Check

6128000-795 

 Prima C/ Prima CS 

Issue 2.2
Printed on November,2020

29

CARE INSTRUCTIONS:

• 

  

Keep accessories away from dust when not in use, e.g. protect them from dust cover.

•   Remove dust with a pneumatic rubber bulb and soft rush.
•   Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
•   Protect your colposcope from moisture, fumes, acids and cosmetic materials. Do not store chemicals

     close to the instrument.

•    Protect  it  from  improper  handling.  Never  install  other  devices  sockets  or  unscrew  optical  system  and

     Mechanical parts unless explicitly instructed to do so in this manual.

•   Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical parts. 

      

        
This instrument is a high grade technological product and not required any special periodical
Maintenance if handed carefully. To ensure optimum performance and safe working order of the
Instrument, its safe functioning must be checked once every 12 months as per table below. We
Recommended having this check performance by our service representative as part of regular
Maintenance work. If a failure occurs which you cannot correct using the trouble-shooting table, attach a 
sign to the instrument stating out of order and contact our service representative for servicing
part or circuit diagram etc.

Содержание Prima C







































Отзывы: