background image

Prima C/ Prima CS COLPOSCOPE 

    

  

INSTALLATION INSTRUCTIONS OF PRIMA CS (continued)

 

 

14

6

5

7

6128000-795 

 Prima C/ Prima CS 

Issue 2.2
Printed on November,2020

   Retrieve the carrier assembly from the packing and follow as below. refer Fig. 2.5

   

Install the coupling to the suspension arm by sliding the guiding shaft (5) in to suspension

     arm.

   Lock the inclined coupling with the threaded plug (6).

   Secure the Flat Head Safety Screw (M5) using a flat head screw driver in the socket situated in

Suspension arm front coupling as shown as (7) in fig. 2.5. The same is hanged with a tie to
Potentiometer knob.

5.1   SPECIAL INSTRUCTION:

   The joint which connects swivel arm and the column is fitted with a stop to prevent the inner assembled cables.

   The total rotation of the swivel arm is not more than 180° to the column.

   On reaching the stop, do not rotate further, to prevent any tear off or damage to the mechanism.

5.2   ADDITIONAL LOAD

   The load capacity and tilting stability is balanced with a Max. 9.0kg load with standard

supplied parts and accessories.

   Please do not attach additional load.

  

Fig. 2.5

Содержание Prima C







































Отзывы: