Labomed eVO 500, Руководство пользователя

Страница: 11 / 22

10
6. Tighten the microscope base locking
screw. Place the guide-rail covers over the
guide-rails (Refer Fig. 4).
Base Locking Knob
Rail Cover
Fig. 4
7. Mount the microscope head on the
microscope carrying arm by sliding it into
position, making sure it is up against the
stop. Then, tighten lock-knob located on
the top of the microscope (Refer Fig.5).
Fig. 5
8. Plug the microscope illumination cable with
4 pin adaptor into the connector on the
back of the power supply as well as on the
back side of the microscope base (Refer
Fig. 6).
9. Connect the 3 pin inlet power cord to
power supply and plug into a wall outlet or
the motorized table stand arm.
Fig.6