Axius Part No: 6137120-795
Issue: 1.0
Printed On: June 10, 2023
Axius
Installation
(continued)
If there is a surface mounted connector
⑥
, saw the cover parts for the floor according to
the on-site conditions.
Plug the two cover parts into each other about the floor fastening on the floor and affix them
with two countersunk-head screws M4x10.
Screw the countersunk-head screws M4 down to the extent that the recesses provided in
the cover can be pushed firmly over the screw heads.
You might need to create a small recess in the cover at this site in order to be able to tighten
down the countersunk-head screws with the cover mounted.
Plug the cover parts for the ceiling into each other about the ceiling fastening and affix them
on the support plate by turning them by a quarter of a turn in clockwise direction.
CAUTION
Collisions due to careless swivelling
Injury and damage to the paint.
Move attached parts carefully and mind the available pivot range.
7
4
5
6
1
2
3
23
