Axius Part No: 6137120-795
Issue: 1.0
Printed On: June 10, 2023
Axius
Installation
(continued)
5.4.1 Kit for angle bracket
The following kits are available as angle bracket for the fastenings of support arm:
Adapter Microscope (Prima) – 6137160-800
Xray arm adapter – 6137160-872
Adapter microscope (Magna) – 6129002-805
Bracket for monitor - 6137160-003
Use: For shifting the mounting point if mounting areas are used doubly.
1.
Insert the slide 6137160-004 with Bracket mount from the top of the column profile and
position and tighten them at the desired height as requested by the customer.
2.
Then affix the Bottom plate 6137160-002 or mounting plate 6137160-106 or Mount monitor
arm 6137160-122 as ordered onto the mounting bracket in the support arm receptacle using
the screw SS-898 as shown.
3.
Fix the Mounting Adapter 6137160-801 of Microscope as ordered with fixed shaft on to the
Mounting bottom plate using head Cap screw SS-993 with allen key.
4.
Fix the mounting plate (for Xray power supply, if ordered) 6137160-106 onto the bracket
and tighten it using screws with allen key. Fix the Mount Monitor arm (if ordered) 6137160-
122 on the bracket using screws SS-898.
5.
Fix the cover as per the height maintained of the mounting adapters. Manually cut the cover
of the maintained height between mounting adapters and fix it by gentle push to get it
locked on the support arm.
6.
Fix the Cover cap 6137160-202 of bottom of the support arm. Fix the top cover cap by gently
lock in the leaf spring fixed in the height adjustment mount.
20
