LM-3605 Dynamic Label Applicator
USERS MANUAL
Page 41
Made in the U.S.A.
© 2019 LABELMILL
12/01/2019 Model LM3605
KEY DEFINITIONS
•
ASYNCHRONOUS OPERATION – The term “ASYNCHRONOUS OPERATION” is used because the speed
of the printer applicator motor (label speed) does not necessarily match the speed of the product conveyor. In
other words their speed is set independently of one another and has NO interrelation. The 3605 can only be
configured in asynchronous operation.
•
SYNCHRONOUS OPERATION -
The LM3605 can NOT be configured in synchronous operation.
The
term “SYNCHRONOUS OPERATION” is used because the speed of the applicator motor (label speed) is
matched to the speed of the product conveyor
•
PRODUCT DELAY is used to electronically move the placement of the label on the product. Product delay will
move the label placement in time (00.000) seconds. Because the product delay feature utilizes time, the
speed of the product MUST remain constant. A product traveling at a higher velocity will travel further in a
given time, thus effecting the placement of the label.
3-13
