user manual
Flashline
Flashline User Manual
page 45
• A Module file is the smallest set of data that can be stored and recalled; it contains crossover, gain, delay, and
limiter information for an individual loudspeaker. A Module file may be recalled into other Lake devices. It is not
possible to store a Module File directly on the hardware device.
• A System or Sub-System Configuration File contains a set of Module file information in addition to Frame related
information such as I/O routing, along with Group control information.
11.9.2 Frame and System Presets
This device allows the complete processor configuration to be stored as a Frame Preset on the hardware unit itself.
Presets can be recalled via the front panel (please refer to section 7.11.7) or via the Lake Controller software (please
refer to the Lake Controller Operation Manual).
A maximum of 100 Frame Presets can be stored on this device. The data within a Frame Preset includes the
configurations of both Modules in the Frame, including all levels, crossover, EQ, input mixer, output routing, and
all other Module, Frame and Group parameters. As Frame Presets are stored in the device, complete processor
configurations may be recalled without the need to connect the device to a PC.
Using the System Presets function in the Lake Controller, entire system configurations can be stored and recalled
across a network of LM 26, PLM, Mesa Quad EQ, Contour Pro 26, and Dolby Lake Processors. This enables fast
retrieval and switching of entire system configurations as minimal data is being sent between the Controller and
Processors.
