user manual
Flashline
Flashline User Manual
page 38
Please refer to the Operation Manual for further details.
10.1.9 Dynamic Function Buttons with LEDs (Right of LCD)
The function of these buttons change according to the currently selected view or menu.
• In Menu Mode they are used for menu navigation and for parameter selection
• In Meter Mode they provide output mute/unmute functionality in conjunction with MUTE ENABLE
All LEDs provides mute, clip, fault and warning indications for the power outputs channels.
10.1.10 Communication LED
The high-intensity white LED illuminates white to indicate that the Module/Frame is selected in the Lake Controller;
it flashes white to indicate communication with the Lake Controller. The brightness of the LCD and communications
LED can be adjusted in the Frame page of the Main Menu on the front panel.
10.1.11 Rotary Encoder
The rotary encoder is used to modify various parameters (e.g. input level) via the menu. When a menu item is
selected that permits adjustment of parameter values, the ring around the rotary encoder illuminates. In Home View
the encoder can be used to scroll through the Meter Views.
10.1.12 Exit
The EXIT button is used primarily while navigating the menu system in Menu Mode; pressing EXIT will return the
menu up one level. In Meter Mode, pressing EXIT returns the metering display to the default Home View.
10.2 Back Panel Overview
INPUT
1
INPUT 2
LINK
1
LINK 2
AES/EBU
INPUT 1-2
LINK 1-2
LINK
SEC
PRIM
ACT
LINK
ACT
SWITCHED 10/100 Base-TX
Must be grounded/earthed
Made in Sweden
PIN 1: SCRN 2: POS 3: NEG
ANALOG WITH
I
SO-
F
LOAT
TM
50-60Hz
100/240V 2400/2950W
Ser. N:o
Removed!
CLASS 2 WIRING
SPEAKER OUTPUTS
1+/- CH 1+/-
2+/- CH 2+/-
1+/- CH 1+/-
2+/- CH 2+/-
3+/- CH 3+/-
4+/- CH 4+/-
1+/- CH 3+/-
2+/- CH 4+/-
5
1
3
2
4
6
7
8
Figure 5: Back Panel Overview