background image

16

The oven and grill functions are both contained within the
one oven compartment and can be used in conventional mode

or with the fan.
In order to operate the grill or the oven, both the thermostat

control knob and the function selector control knob must be
activated. Turning only one control knob will not have any
effect on the oven except to turn on the oven light or the

electric fan. The thermostat controls the oven at settings up to
250

°

C.

Oven functions

Oven light.

Upper and lower heating elements.
(Conventional cooking).

Upper heating element only.

Lower heating element only.

Inner grill heating element.

(Radiant grill).

Full grill heating element.
(Radiant grill).

Full grill heating element with fan.
(Fan grill).

Rear circular heating element with fan.
(fan forced cooking).

 

Fan on only (Defrost).

Switching the oven ON

1. Turn the function selector control to the required cooking

mode. The orange ‘power on’ thermostat indicator light

illuminates.

2. Set the temperature control to the required cooking

temperature. The selected temperature will be maintained
automatically.

The orange thermostat indicator light illuminates when
the oven is first turned on, and extinguishes when the

21

The electronic timer allows for manual or electronic operation.
the timer graphic symbols are shown in the figure below.
To program the oven press the desired function button and adjust
the required time using the   and   buttons.

Setting time of day

When first switching on power to appliance, or after a power

failure, the timer display flashes 0.00. To set the correct time of
day press the   and the   buttons simultaneously and adjust
the time using the   and   buttons.

Oven will not switch on/to clear a program

If the oven will not switch on and the   symbol is illuminated on
the display, a program is still running. To clear a program press

the 

 and the   symbols simultaneously. The   ssymbol will

switch off and the   only will be illuminated.

Manual operation

1. Turn the function selector control knob to the required mode.
2. Then turn the thermostat control knob to the desired

temperature.

NOTE: only the   will be illuminated.

Manual operation with timer

1. Turn the selection control knob to the required mode.
2. Then turn thermostat control knob to the desired temperature.
3. Press the 

 symbol and adjust the required cooking time

using the   and   buttons.

NOTE: the   and the ‘

’ symbols should be illuminated.

Electronic control functions

Содержание LUEP51-90-S




































Отзывы: