A:
Error:
Weather Station cannot be found.
Repeat the synchronization process, we need to put both the weather
station and the software into synch mode again. To do this press the down
arrow on the display, then click the Synchronize button on the
‘Synchronize message box (on the software).
A:
Error:
Please start the WV5 Communications Service to receive date from
your weather Station.
START WV5 SERVICE:
Go to START, CONTROL PANEL, ADMINISTRATIVE TOOLS,
SERVICES (not Component Services).
Scroll down and look for
WV5 Communication
.
If it is not “started” please 'START' the service.
If it is “started” please “STOP” the service and “RESTART” the service.
(upper left of screen)
Go to the software and select EXTRAS, then RESYNCHRONIZE and
press an hold the DOWN ARROW on the display the press the
SYNCHRONIZE button on the software.
Q: Lose sync with display.
A:
Move the display closer to the USB stick. Avoid placing display near
cordless phone or wireless router which may cause interference.
A:
Go to the software and select EXTRAS, then RESYNCHRONIZE and
press an hold the DOWN ARROW on the display the press the
SYNCHRONIZE button on the software.
Q:
High rain readings in software.
A:
PLEASE CHECK YOUR SOFTWARE VERSION:
You should be using version
1.3 software
for the WS-2811U-IT
A:
Spikes in your rain reading on the computer can be caused be radio
frequency interference or loss of signal while connected to the computer.
A:
When your weather station is connected to the computer while loss of
signal from the sensors, or a restart occurs, there can be a spike in rainfall
