Q:
Min/Max readings.
A
:
The weather station will record the maximum and minimum value of the
various weather data with time and date of recording automatically. The
following stored maximum and minimum weather data can be viewed by
pressing the MIN/MAX key in normal display mode.
MIN/MAX Indoor Temperature
MIN/MAX Indoor Humidity
MIN/MAX Outdoor Temperature
MIN/MAX Dew Point Temperature
MIN/MAX Outdoor Humidity
MAX Wind Gust
Total Rainfall
A:
Reset the MIN/MAX weather data
: To reset the MIN/MAX weather data,
you need to reset each of the values independently.
Press and release the MIN/MAX button to show the desired weather data.
Press
▲UP ARROW button. The stored value will be reset to the current
value and current time.
A
:
Reset Total Rainfall:
The Total Rainfall measurement is displayed shows the total rainfall
accumulated since last reset of the total rainfall amount.
Press and release the MIN/MAX button until the display shows the Total
Rainfall value.
To reset the rainfall reading, press the
▲UP ARROW button. The total
rainfall amount will be reset to 0, and the time updated to current time.
NOTE
: Until the first rainfall total reset is performed, the time and date of
the total rainfall are displayed as '- - -.--.----'. After the rainfall total is reset,
the rainfall total display will indicate the date and time of the last rainfall
total reset.
Q:
Pressure reads incorrect.
A:
Enter the program menu to select the pressure unit of measure (inHg is
common in the USA) and set the actual Relative Pressure numbers on the
display. You can set it to a known value from your local reporting station.
Q:
Pressure shows dashes or OFL.
