8.6 Outdoor Humidity High Alarm Setting
1) Place your cursor over the outdoor humidity high alarm box and right click the mouse to open the outdoor
humidity high alarm window
2) Drag the cursor over the sliding scale to set the desired outdoor humidity high or enter the humidity in the
box provided
3) Click the alarm active box to set the outdoor humidity high alarm
4) Click the set button to confirm
5) The outdoor humidity high alarm is now set and will activate when the set outdoor humidity level is
reached (for setting the outdoor humidity high alarm setting from the base station, see main instruction
manual).
Note:
The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few
seconds for the program to calculate and confirm the setting
Once the alarm is entered into the Heavy Weather program, the information will be transferred to the
base station. In some situations, the alarm icon may not appear immediately on the base station’s
LCD but will appear after a short delay due the constant data communication between all the
sensors, base station and the PC.
8.7 Outdoor Humidity Low Alarm Setting
1) Place your cursor over the outdoor humidity low alarm box and right click the mouse to open the outdoor
humidity low alarm window
2) Drag the cursor over the sliding scale to set the desired indoor humidity low or enter the humidity in the
box provided
3) Click the alarm active box to set the outdoor humidity low alarm
4) Click the set button to confirm
5) The outdoor humidity low alarm is now set and will activate when the set humidity level is reached (for
setting the outdoor humidity low alarm setting from the base station, see main instruction manual).
Note:
The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few
seconds for the program to calculate and confirm the setting
Once the alarm is entered into the Heavy Weather program, the information will be transferred to the
base station. In some situations, the alarm icon may not appear immediately on the base station’s
LCD but will appear after a short delay due the constant data communication between all the
sensors, base station and the PC.
