English
7 EN
BEFORE YOU START
Groups
• Hook up the
¿
lter holders to the groups (without coffee).
• Let each group dispense water for about a minute.
Hot Water
• DT version with display.
Run the water replacement as indicated in the section "
Changing the
water in the boiler
".
• C version / DT version without display.
Continuously dispense hot water (pressing the
appropriate button) until at least 5 liters of water have been used for a machine with 2 groups,
and 8 liters for a machine with 3 groups.
See the “Hot water dispensing” chapter in the User’s Manual.
Steam
(also with Turbosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
DURING OPERATION
Steam dispensing
(also with Turbosteam)
• Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and
let the steam escape so that condensation is eliminated.
Coffee dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 100 cc and discard the liquid.
Hot water dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 200 cc and discard the liquid.
Cleaning the coffee
• Please read the speci
¿
c section in the user’s manual to learn how to clean these circuits.
WARNING
: BEFORE YOU START OPERATING THE MACHINE, WASH THE INTERNAL
COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE MA-
CHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
6. Prescrizioni per l’operatore
6. Rules for the worker operating the machine
