L3Harris NARDA AMS-8061, Руководство пользователя

Страница: 8 / 242

VIII EC Conformity
SAFETY RECOMMENDATIONS AND INSTRUCTIONS
This product has been designed, produced and tested in Italy, and it left the factory in conditions fully
complying with the current safety standards. To maintain it in safe conditions and ensure correct use,
these general instructions must be fully understood and applied before the product is used.
•
When the device must be connected permanently, first provide effective grounding;
•
If the device must be connected to other equipment or accessories, make sure they are all safely
grounded;
•
In case of devices permanently connected to the power supply, and lacking any fuses or other
devices of mains protection, the power line must be equipped with adequate protection
commensurate to the consumption of all the devices connected to it;
•
In case of connection of the device to the power mains, make sure before connection that the voltage
selected on the voltage switch and the fuses are adequate for the voltage of the actual mains;
•
Devices in Safety Class I, equipped with connection to the power mains by means of cord and plug,
can only be plugged into a socket equipped with a ground wire;
•
Any interruption or loosening of the ground wire or of a connecting power cable, inside or outside the
device, will cause a potential risk for the safety of the personnel;
•
Ground connections must not be interrupted intentionally;
•
To prevent the possible danger of electrocution, do not remove any covers, panels or guards installed
on the device, and refer only to NARDA Service Centers if maintenance should be necessary;
•
To maintain adequate protection from fire hazards, replace fuses only with others of the same type
and rating;
•
Follow the safety regulations and any additional instructions in this manual to prevent accidents and
damages.