L3Harris NARDA AMS-8061, Руководство пользователя

Страница: 201 / 242

SMS Messages and Commands 5-33
82 StopFreq 4 float Little Endian 32bit IEEE floating point number
representing the Stop frequency of the first band and it is
expressed in Hz.
86 Reserved 1 Unsigned char Reserved, it must be 0
87 Reserved 1 Unsigned char Reserved
19 bands follow here exactly as the above described band 1.
n= 1 to 19
n*10+78 StartFreq 4 float Little Endian 32bit IEEE floating point number
representing the start frequency of the n band and it
is expressed in Hz.
n*10+82 StopFreq 4 float Little Endian 32bit IEEE floating point number
representing the Stop frequency of the n band and it
is expressed in Hz.
n*10+86 Reserved 1 Unsigned char Reserved, it must be 0
n*10+87 Reserved 1 Unsigned char Reserved
278 Reserved 8 Unsigned char Reserved
286 Status
alarm 2 Unsigned int
Being Bits this is
BIG endian
The status of Alarm contains the alarm bit by bit where ‘1’
means Alarm ON while ‘0’ is Alarm OFF. Here is a list
alarms.
0x0001-> MAX threshold Field OUT.
0x0002-> Warning threshold Field OUT.
0x0010-> LOCK OUT.
0x0080-> Low Battery Voltage OUT
0x0004-> Antenna OUT
0x0020-> Temperature
0x0040-> RH
0x0008-> MAX threshold Field IN.
0x0100-> Warning threshold Field IN.
0x0400-> LOCK IN.
0x0800-> Low Battery Voltage IN
0x0200-> Antenna IN
288 Temp 2 int This parameter shows the AMS-8061 Temperature.
It is ten times the last measured temperature.
Thus, in order to get actual temperature Temp should be
divided by 10
290 RH 2 Int This parameter shows the AMS-8061 Relative Humidity.
It is ten times the last measured Relative Humidity.
Thus, in order to get actual Relative Humidity, RH should
be divided by 10
292 Battery 2 Int This parameter shows the AMS-8061 current voltage.
It is hundred times the last measured Battery Voltage.
Thus, in order to get actual Battery Voltage, Battery
should be divided by 100
294 Reserved 186 None
480 Firmware 32 Char The Fw name and version. This is a null terminated string