L3Harris NARDA AMS-8061, Руководство пользователя

Страница: 200 / 242

5-32 SMS Messages and Commands
55 GPRS
Interval 1 Unsigned char This parameter represents the interval between GPRS
connections (starting from the first connection which is
done at Appoint). It is expressed in hours.
56 Prxon 1 Unsigned char This is the flag for connecting to GPRS upon alarms.
If bit 0x01 is ‘1’ and one or more unmasked alarm is set,
a GPRS connection is done as it was for schedule.
Note that bit 0x08, the GPRS Flag, must always be ON.
57 Reserved 1 Unsigned char None
58 SMS
Sched 2 Unsigned int This parameter represents the scheduled time for SMS
schedule of the day. It is expressed in minutes elapsed
since midnight.
For example the schedule 12:30 would be (12*60)+30
=750
60 SMS
Ton 1 Unsigned char This parameter represents the time the GSM remains
ON after a SMS connections. It is expressed in quarters
of hour.
61 SMS
Interval 1 Unsigned char This parameter represents the interval between SMS
connections (starting from the first connection which is
done at Appoint). It is expressed in hours.
62 SMS
Xon 1 Unsigned char This is a double flag for sending a report and alarm on
SMS.
If bit 0x01 is ‘1’ and one or more unmasked alarm is set,
a “ALR” like SMS is sent to the number stored in the
SMS telephone directory.
If bit 0x02 is ‘1’ a “RPT” like SMS is sent to the number
stored in the SMS telephone directory.
63 Reserved 1 Unsigned char Reserved
64 Reserved 2 Unsigned int Reserved
66 Reserved 1 Unsigned char Reserved
67 Reserved 1 Unsigned char Reserved
68 Reserved 1 Unsigned char Reserved
69 Reserved 1 Unsigned char Reserved
70 Ethernet
Sched 2 Unsigned int This parameter represents the scheduled time for
Ethernet schedule of the day. It is expressed in minutes
elapsed since midnight.
For example the schedule 11:08 would be (11*60)+8
=668
72 Reserved 1 Unsigned char Reserved
73 Ethernet
Interval 1 Unsigned char This parameter represents the interval between Ethernet
connections (starting from the first connection which is
done at Ethernet Sched). It is expressed in hours and it
can be either 12 or 24.
74 Ethernet
Schedule
Active 1 Unsigned char This parameter enables/disables Ethernet Scheduling
When “Ethernet Schedule Active” = 0x02 the Ethernet
activity is regulated by “Ethernet Sched”.
Instead, when “Ethernet Schedule Active” is 0 the
Ethernet is OFF
75 Reserved 3 Unsigned char Reserved
78 StartFreq 4 float Little Endian 32bit IEEE floating point number
representing the start frequency of the first band and it is
expressed in Hz.