L3Harris NARDA AMS-8061, Руководство пользователя

Страница: 149 / 242

Point to Point and FTP Communication 4-25
7) Click Add Station button on the right side to add a new station to your
list and fill the new form with requested parameters:
Station Identifier (Name)
:
“New8061FTP” in this example, you can decide for any alphanumeric
name.
The station list cannot contain two or more stations with the same name.
The folder containing all information and data of a specific station is created
automatically by the control software. The folder name is the same
assigned to the station in the station list.
S/N:
“
140WY60901” in this example, is the serial number, different for any
station.
By means of the control software a new directory with the same name will
be created in the FTP server. It will be used for any data exchange between
PC-server FTP and station-server FTP related to this specific station.
Address:
“178.32.31.89” in this example Narda STS ftp server IP address that can be
used by User for preliminary tests.
Be aware that data in this server are
periodically removed.
User must set here the static IP address of his FTP server.
User Name
and
Password:
Respectively “8057” and “amb8059” in this example to access the Narda
STS ftp server for test.
User must set access parameters for his own ftp server.
Downloading data from FTP server to PC.
If disable the data in FTP server will be downloaded on PC since the latest
download up to actual date and time
If enabled (
√
) the data in FTP server can be downloaded on PC in the data
interval set on “Start” to “Stop” at the time indicated.
The above information S/N, Address, User name and password are
necessary for the controller PC to access the ftp server for
downloading station measurement results and change setting to the
remote station.
After typing, press “Return” key to set each single parameter. Every
time a single parameter is set in this form the user will be asked to
type the terminal password.