GH-3100
Installation & Operation Manual
Page 5-6
Operation
TP-559
March 30, 2017
Revision K
5.2.2.3.10 NAV Displays
The NAV DISPLAYS... menu item is shown when displaying the VOR/ILS Mode with DME, TACAN
Mode, or FMS Mode. When the NAV DISPLAYS... function is activated, the current menu list is
replaced with the items from the following list which are relative to the active NAV Mode display:
•
DME GROUNDSPEED [ON or OFF]
•
DME TIME [ON or OFF]
•
TCN GROUNDSPEED [ON or OFF]
•
TCN TIME [ON or OFF]
•
FMS BEARING [ON or OFF]
The purpose of this sub-menu is to allow the pilot to toggle on or off some of the secondary data in the
NAV displays. For a particular NAV display, the data items shown above that are not shown have the
“ON”. Activation of an “ON” menu item adds that data to the NAV display. For a particular NAV
display, the data items shown above that are shown have the “OFF”. Activation of an “OFF” menu item
removes that data from the NAV display.
5.2.2.3.11 Baro Type
Activation of the BARO TYPE... function shows one of the three following sub-menus where the items of
the list are based on the current operating mode.
1
2
3
If in HPA mode:
If in MB mode:
If in HG mode:
MB
HPA
HPA
IN HG
IN HG
MB
Of the three-baro types, the two that are not shown are shown in the sub-menu. Activation of a baro type
changes the baro display to that type.
5.2.2.3.12 IAS Tape Direction
The IAS TAPE DIRECTION [UP or DOWN] menu item is shown when IAS INCREASE TAPE
DIRECTION configuration option is set to PILOT MENU ITEM. The IAS TAPE DIRECTION UP is
shown when the IAS tape moves downward for increasing IAS. The IAS TAPE DIRECTION DOWN is
shown when the IAS tape moves upward for increasing IAS. Activation of the IAS TAPE DIRECTION
function toggles the direction of the movement of the IAS tape.
5.2.2.4 Menu Operation
5.2.2.4.1 Menu Item Highlight
When the menu mode is first initiated after Power-On or the previous highlighted position within the
menu is no longer part of the menu list, the FAST ERECT command is highlighted. After the first menu
mode activation, the last highlighted menu item is highlighted when the menu mode is initiated again.
5.2.2.4.2 Sub-Menu Highlight
When the sub-menu list is first initiated after Power-On, the first item in the list is highlighted.
