Oval 80 and Sentinel Radiant Tube Brood Heaters
www.lbwhite.com
Owner’s Manual • Oval 80 and Sentinel
14
SUPPORTS
FIG. 9
CONNECTION STRIPS:
• Insert a connection strip halfway into
the folded channel at both sides of a
re
fl
ector, at the end without
fl
anges.
• Slide this end of the re
fl
ector through
the hanger and push it
fi
rmly into the
folded channels of the re
fl
ector at the
burner box.
• The un
fl
anged end of the re
fl
ector
will overlap the
fl
anged end of the
adjacent re
fl
ector.
FLANGE
OVERHEAD
SUPPORT
CONNECTOR STRIP
(DIMPLES UP)
Refer to Fig. 9 and the following instructions:
1. Slide the re
fl
ector through the hangers until it is
about .3 m or .6 m away from the burner box.
2. Attach end cap to end of this re
fl
ector.
Use 4 U-clips. Push this re
fl
ector up to burner box.
3. Sentinel Brood Heaters Only: Install a support at
end of re
fl
ector nearest burner box and at middle
and ends of all re
fl
ectors. Do not install a support
directly next to a hanger on the same re
fl
ector.
Installing Reflectors & Supports
4. Connect the re
fl
ectors using the dimpled con-
nector strips. See below.
5. Repeat Steps 3 and 4 for remaining re
fl
ectors.
6. Attach remaining end cap to last re
fl
ector with
U-clips.
REFLECTOR END VIEW
SHOWING FOLDED
CHANNEL
DOTTED LINES: INDICATE
CONNECTOR WITHIN FOLDED
CHANNEL