COMPONENTS
8
Leg Bar Assemblies
16
Horizontal Support Bars
1
Tank Liner with 3” Flange Cap
1
Field Carry Bag
1
Ground Cover (Optional)
CUSTOMER SUPPORT
1-800-971-7201
Monday – Friday, 7am-330pm Pacific Time
INSTRUCTION MANUAL
1. Remove Tank Liner from field bag and
place in location to be assembled.
Partially unfold Tank Liner until you see
the outline of the body of the Tank Liner.
2. Place the eight (8) Leg Bar assemblies
at each of the corners of the Liner with
the arrows pointing outward.
3. Place a pair (2) of upper and lower
Support Bars between the Leg Bars and
end-to-end around the Liner.
4. Hold the Leg Bar assembly upright with
the arrow pointing up. Connect the
lower Horizontal Support Bar to the
bottom of the Leg Bar Corner Block by
depressing the push button on the block
and pushing the Support Bar on the
Block until the push button “clicks’ into
the locked position.
5. Repeat connecting the lower Horizontal
Support Bars until all eight sides form
the complete base frame.
6. Locate the Tank Liner corners and align
with the Leg Bar assemblies. While
holding the top edge of the Tank Liner,
slide the upper Horizontal Support Bar
into the Liner Support Pocket.
7. Slide the Support Bar completely
through the two (2) Support Pockets.
8. Connect the upper Horizontal Support
Bar to the top of the Leg Bar Corner
Block by depressing the push button on
the block and pushing the Support Bar
on the Block until the push button
“clicks’ into the locked position.
9. Repeat connecting the upper Horizontal
Support Bars until all eight sides form
the completed SNAPTANK frame.
Step-by-Step Assembly Instructions
