L-Acoustics LA4X, Руководство пользователя

Страница: 56 / 83

Operation
ADDRESS
modifying the IP address
OUT4 /
‾ADDRESS ‼※
192 . 168 . 1 . 100
ADDRESS
192 . 168 . 1 .>100<
ADDRESS
192 . 168 . 1 .>101<
ESC
OK /
‾ADDRESS ‼※
192 . 168 . 1 . 100
‾ADDRESS ‼※
192 . 168 . 1 . 101
Procedure
1. From the main menu, select IP SETTINGS .
2.
Press the OK key or the encoder wheel to validate.
3. Long-press the OUT4 key or press the encoder wheel to select the last byte.
4.
Turn the encoder wheel to select a value for the byte.
Turn the encoder wheel for 1-step resolution.
Press and turn the encoder wheel for 10-step resolution.
5.
Press the OK key or the encoder wheel to apply, or the ESC key to cancel.
6. If needed , set another byte (rst, second or third number) as follows:
a) Long-press the OUT key under the byte to select it.
b) Turn the encoder wheel to select a value.
c) Press the OK key or the encoder wheel to apply.
d) On the computer hosting LA Network Manager, congure the same subnet.
Refer to the LA Network Manager Help (in User guide > General ).
e) In LA Network Manager:
1.
Click the L-Acoustics logo and select
Options
.
2.
Enter the corresponding values in
IP Range to scan for L-NET
.
Values for the rst byte (rst number) are restricted to Private Local Area Network prexes: 10, 100, 169,
172, and 192.
For the rst three bytes, set all Units of a system to the same values (for instance 192.168.1) for remote
control by LA Network Manager.
56 LA4X owner's manual (EN) version 14.1