Kyoritsu Electrical Instruments Works KEW 2062 Скачать руководство пользователя страница 23

Страница: 23 / 49

6.1 RMS/ Frequency measurement

KEW 2062/2062BT

- 21 -

KEW 2062/2062BT

Chapter 6 Display items by measurement function

6.1 RMS/ Frequency measurement

While viewing “Waveform” on your Smartphone or tablet device using our

app via Bluetooth, KEW 2062BT’s LCD will be like the illustration shown

to the right and won’t show the measured values.

To check the measured values on the instrument, switch the item on your

Bluetooth device using the app from “Waveform” to “Measured value”, or

disconnect Bluetooth communication.

RMS current, frequency

Set the function switch to “

“.

Auto-ranging function activates and switches the current range

depending on the measured value.

A short press of Mode button: switches display modes between

Inst, MAX, MIN, AVG, and |PEAK|.

* Each of above values is determined after pressing the mode

button and measurements get started.

A long press of Mode button: clears measured values (MAX, MIN, AVG, and |PEAK|).

Instantaneous value

MAX (Max. value)

MIN (Min. value)

|PEAK| (Peak value)

AVG (Average value)

Range is fixed while the LCD is showing MAX, MIN, AVG, or |PEAK|. The auto-ranging function

is reactivated when switching the display to instantaneous value.

Mode

button

Mode

button

Mode button

Mode

button

KEW 2062/2062BT

RMS voltage, frequency

KEW 2062/2062BT

- 22 -

Note

●

When current is measuring current in PEAK mode, opening and closing operation of the

current sensor affects the readings. To obtain accurate readings, check the readings

while clamping onto the conductor to be tested or turn on the data hold function before

unclamping the conductor.

●

In the PEAK mode, sampling is performed in one cycle and PEAK value (crest value) is

determined based on the result. The sampling is performed just once in 0.5s, therefore,

the Tester cannot measure a sudden input signal such as inrush current.

RMS voltage, frequency

Set the function switch to “

“.

A shot press of Mode button: switches display modes

between Inst, MAX, MIN, AVG, and |PEAK|.

* Each of above values is determined after pressing the mode

button and measurement get started.

A long press of Mode button: clears measured values (MAX

MIN

AVG

, and

|PEAK|).

Instantaneous value

MAX (Max. value)

MIN (Min. value)

|PEAK| (Peak value)

AVG (Average value)

Note

●

In the PEAK mode, sampling is performed in one cycle and PEAK value (crest value) is

determined based on the result. The sampling is performed just once in 0.5s, therefore,

the Tester cannot measure a sudden input signal such as inrush current.

Mode

button

Mode

button

Mode button

Mode

button

Instantaneous value

MAX (Max. value)

MIN (Min. value)

|PEAK| (Peak value)

AVG (Average value)

Mode

button

Mode

button

Mode button

Mode

button

www.

.com

[email protected]

1.800.561.8187

Содержание KEW 2062


















































Результаты поиска

Содержание KEW 2062

Отзывы:

Бренды по названию

Популярные бренды

Kyoritsu Electrical Instruments Works KEW 2062, Инструкция по эксплуатации

Результаты поиска

Содержание KEW 2062

Отзывы:

Бренды по названию

Популярные бренды