Kyocera FS-5900C, Руководство пользователя

Страница: 50 / 132

37
Using the Printer
Navigating through the menus
The menus are in the hierarchy as shown in the diagram above. Use the + and - keys to
move between menus in the same level (“vertically” in the table). The
+
key shows the
next menu, while the - key shows the previous one. Change levels by using the and
keys. The key moves to lower levels (sub-menus), while the key moves to higher
levels.
To change a specific item, for example, the sleep mode timeout time, proceed as follows:
1 Press the
MODE
key.
The message display will show one of the first level menus (
Level 1
in the table on
pages 34 to 36) depending on the previous selection.
2
Press + until
Others >
is shown on the display.
3 Press .
The message display will show one of the second level menus (
Level 2
in the table
on pages 34 to 36) belonging to the Others menu above depending on the previous
selection.
4 Press
+
until
Sleep timer
is shown on the display.
5 To change the timeout value, press
ENTER
.
If you want to abandon setting, press
CANCEL
, then press
MODE
.
6 Press + repeatedly to increase the timeout time; press - repeatedly
to decrease the timeout time until the desired timeout time (in
minutes) is displayed.
7
Press ENTER to confirm the new setting.
You can abandon the new setting by pressing CANCEL , then MODE .
8
To quit the mode selection sequence, press EXIT .
(2), (4), (6)
(3)
(5), (7)
(1), (8)