Using Setup “SET UP” Mode Functions
81
SET UP
[INSERT DATE] Setting to Write the Date in the
Image
Use this function if you want the date to be written in the image. Once the function is
set to [WITH DATE], the date is written in images when shooting.
●
Once the date is written on an image, you cannot erase the date.
Operation — setting to [WITH DATE]
1
Turn on the power and set the mode select dial to “SET UP”.
[WITH DATE]
The date is written in images when shooting.
[NO DATE]
(default)
The date is not written.
2
Press Up or Down on the directional keypad to
select [INSERT DATE], then press Right on the
directional keypad.
3
Press Up on the directional keypad to select [WITH
DATE], then press the
e
button to complete the
setting.
●
When the function is set to [WITH DATE], the date is always dis-
played on the LCD monitor when shooting.
●
Note that the date will be printed twice if you set this [INSERT
DATE] to [WITH DATE] and set [DATE] in [PRINT] (page 76) to
[PRINT],
●
The date is written on the right bottom cor-
ner of the image.
SET UP(1/3)
BRIGHT CNTRL
STANDARD
DATE
INSERT DATE
FORMAT
POWER SAVE
2003.08.15
NO DATE
WITH DATE
3MIN
00_8CQ.book Page 81 Wednesday, May 14, 2003 8:10 PM
