Kyocera C5020N - FS Color LED Printer, Руководство по обслуживанию

Страница: 31 / 216

2F3/2F4-3.0
1-3-9
4. Open the stoppers of the memory socket.
5. Insert the memory so that the two notches of
the memory are engaged with the projec-
tions of the memory socket.
6. Close the stoppers of the memory socket.
7. Reattach the main controller PWB in the
printer.
8. Print a status page to check the memory
expansion.
* If memory expansion has been properly
performed, information on the installed
memory is printed with the total memory
capacity has been increased (standard
memory capacity 128 MB).
Figure 1-3-13
Main controller PWB
(16 ppm printer)
Main controller PWB
(24 ppm printer)
Stopper
Stopper
Memory socket
Memory
(DIMM)