Kyocera C5020N - FS Color LED Printer, Руководство по обслуживанию

Страница: 85 / 216

2F3/2F4-3.0
1-5-33
(15) Fusing is loose. Causes
1. Wrong types of paper.
2. Defective pressure for the heat roller and press roller (press belt).
3. Flawed heat roller or press roller*
1
/belt*
2
.
Causes Check procedures/corrective measures
1. Wrong types of paper.
Check if the paper meets specifications, replace paper.
2. Defective pressure for the heat roller and
press roller*
1
/belt*
2
.
Check the fuser
2. The primary transfer belt is not in its
proper position or the primary transfer
unit is defective.
Confirm the position of the primary transfer belt. Check the primary
transfer unit.
Replace the primary transfer unit. See page 1-6-22.
pressure springs. See page 1-6-26 [28] or 1-6-33 [37].
3. Flawed heat roller or press roller*
1
/belt*
2
. Replace the heat roller and press roller*
1
/belt*
2
. See page 1-6-26 or 33.
(16) Colors are printed offset to each
other.
Causes
1. The drum unit is not properly seated in its position.
2. The primary transfer belt is not in its proper position or the primary transfer
unit is defective.
Causes Check procedures/corrective measures
1. The drum unit is not properly seated in its
position.
Perform the color registration to correct (Refer to operation guide).
*1
: 16 ppm printer,
*2
: 24 ppm printer