2F3/2F4
1-6-7
(2) Detaching and refitting the paper feed roller
Procedure
1. Remove the paper feed unit (See previous
page).
2. Turn over the paper feed unit.
3. While pushing the lock release buttons and
then detach the joint.
4. Unlatch the latches and then remove paper
feed roller unit.
Figure 1-6-8
5. Unlatch the three latches and then remove
the feed bracket cover.
6. Remove the feed roller and pickup roller.
* The one-way clutch is built in to the pickup
gear Z32S. When the pickup gear Z32S is
installed again, the surface of one-way
clutch side is directed to feed bracket cover
side.
7. Check or replace the feed roller and then
refit all the removed parts.
Figure 1-6-9
Paper feed roller unit
Lock release
button
Lock release
button
Joint
Latches
Feed bracket cover
Latches
Latch
Feed roller
Pickup roller
Pickup gear Z32S
One-way clutch
Содержание C5020N - FS Color LED Printer
