Kyocera C5020N - FS Color LED Printer, Руководство по обслуживанию

Страница: 72 / 216

2F3/2F4-3.0
1-5-20
F020 Main controller PWB memory check
error
• It could not access to the standard
memory or the optional expanding
memory
ich are mounted on the
Defective main
controller PWB
Defective expand-
ing memory. If the expanding memory is installed, after
removing or replacing the expanding mem-
ory, do the operation check. If operation is
normal, replace the expanding memory. See
page 1-3-8.
F030 Main controller PWB system error
• The error which is related to the sys-
tem other than the error code F0
(F010) and F020 occurred.
Defective main
controller PWB
F040 Engine controller PWB communica-
tion error
•
Defective engine
controller PWB
(A0004). Replace the engine controller PWB (A0004).
See page 1-6-41.
Defective main
controller PWB
F050 Engine controller PWB flash ROM
error
• Abnormality occurring in the flash
ROM which is mounted on the engine
controller PWB (A0004), the main con-
troller PWB (A0010*
1
/A0011*
2
)
received notification.
Defective engine
controller PWB
(A0004). Replace the engine controller PWB (A0004).
See page 1-6-41.
Code Contents
Remarks
Causes Check procedures/corrective measures
main PWB (A0010*
1
/A0011*
2
)
normally.
(A0010*
1
/A0011*
2
).
(A0010*
1
/A0011*
2
).
(A0010*
1
/A0011*
2
).
Replace the main controller PWB (A0010*
1
/
A0011*
2
). See page 1-6-40.
Replace the main controller PWB (A0010*
1
/
A0011*
2
). See page 1-6-40.
Replace the main controller PWB (A0010*
1
/
A0011*
2
). See page 1-6-40.
The main controller PWB (A0010*
1
/
A0011*
2
) does not communicate to
the engine controller PWB (A0004)
normally.
*
1
: 16 ppm printer, *
2
: 24 ppm printer
F0
(F000)
Operation panel PWB communication
error
•
•
The operation panel PWB (A0007)
does not communicate to the main
contorller PWB (A0010*
1
/A0011*
2
)
normally 30 seconds.
Defective main
controller PWB
(A0010*
1
/A0011*
2
).
Defective main
controller PWB
(A0010*
1
/A0011*
2
).
Defective opera-
tion panel PWB
(A0007). Replace the operation panel PWB (A0007).
F010 Sys
D020 Engine firmware error
tem DIMM PWB checksum error
• The system DIMM PWB (A1137*
1
/
KP-893*
2
) which sores the program
checksum did not coincide.
Defective system
DIMM PWB
(A1137*
1
/KP-893*
2
).
Replace the main controller PWB (A0010*
1
/
A0011*
2
). See page 1-6-40.
Replace the main controller PWB (A0010*
1
/
A0011*
2
). See page 1-6-40.
Replace system DIMM PWB (A1137*
1
/
KP-893*
2
).
Serious status inconsistency that is
fatal to keep controlling in the engine
firmware is detected.
Malfunction of the
engine firmware or
defective engine
firmware. Turn the power off/on to restart the printer.
If the error is not resolved, check the update
information on the engine firmware. Update
the engine firmware as needed.