Kyocera Mita FS-1050, Руководство по эксплуатации, Страница: 89 / 209

Using the Operator Panel
1-79
Sleep Timer Setting
The printer has a sleep timer that allows to conserve power when it is not
printing, processing or receiving data. You can adjust the timer; in other
words, you can set the length of time before the printer enters sleep mode
when it is idle. The default is
5
minutes.
1
Press the MENU key.
2
Press the or key until
Others >
appears.
3
Press the > key.
4
Press the or key until
>Sleep Timer >
appears. The default
setting is
005 min
.
5
Press the ENTER key. A blinking cursor (
_
) appears.
6
Press the or key to increase or decrease the value where the
cursor is blinking and set the desired time. The timer can be set
between
5
and
240 min.
, in 5-minute increments. You can use the >
and < keys to move the cursor right and left.
If you want to abandon this procedure, press the CANCEL key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to
Ready
.
Others >
>Sleep Timer >
005 min.
>Sleep Timer
005 min.