Kyocera Mita FS-1050, Руководство по эксплуатации

Страница: 30 / 209

Using the Operator Panel
1-20
5
Press the ENTER key again.
6
Press the > key. Each time the or key is pressed, the setting
item and current setting change as shown below.
7
Display the setting item to be changed and press the ENTER key. A
question mark (
?
) appears.
The following example shows how to change the baud rate. The
settings for other items can be changed in a similar manner.
8
Press the or key to display the desired setting. The setting
changes as shown below.
The baud rate can be selected from
1200
,
2400
,
4800
,
9600
(default),
19200
,
38400
,
57600
, and
115200
.
Some computers may not be compatible with a baud rate of 115200 bps.
If you set the baud rate to 115200 and communication problems occur,
lower the baud rate.
>Baud Rate
9600
>Data Bits
8
>Stop Bits
1
>Parity
None
Definable baud rates:
1200
,
2400
,
4800
,
9600
(default),
19200
,
38400
,
57600
,
115200
Definable data bits:
7
,
8
(default)
Definable stop bits:
1
(default),
2
Definable parity:
None
(default),
Odd
,
Even
,
Ignore
>Protocol
DTR(pos.)&XON
Definable protocol:
DTR(pos.)&XON
(default),
DTR(positive)
,
DTR
(negative)
,
XON/XOFF
,
ETX/ACK
>Baud Rate
? 9600
Note