KYMCO Downtown 200i, Руководство по обслуживанию, Страница: 215 / 230

18. STARTING SYSTEM
18-4
DOWNTOWN 200i
I NSTALLATION
Connect the starter motor cable.
Check the O-ring for wear or damage and replace
if necessary.
Apply grease to the O-ring and install it to the
starter motor.
Tighten the two mounting bolts.
STARTER RELAY INSPECTION
Disconnect the starter relay wire connector.
Check for continuity between the yellow/red wire
and green/yellow wire.
There should be continuity when the starter
button is depressed.
If there is no continuity, check the starter button
for continuity and inspect the wire.
OPERATION TEST
Connect the electric meter to the starter relay
terminals that connect to the battery positive cable
and the starter motor cable.
Connect a fully charged battery across the starter
relay yellow/red and green/yellow wire terminals.
Check for continuity between the starter relay
large terminals. The relay is normal if there is
continuity and hear sounds.
Starter Relay test chart
Starter Motor Cable
O-ring
Yellow/Red Wire