KYMCO AHG5, Руководство по обслуживанию, Страница: 185 / 363

10. A.C. GENERATOR & STARTER CLUTCH
DT X360
10-3
2. SERVICE INFORMATION
2.1. General Instructions

All servicing operations and inspections in this section can be made with the engine
installed.

Drain the coolant before removing the right crankcase cover.

Be careful not to drain the coolant when the engine temperature is high. (Perform this
operation when the engine is cold.)

Drain the coolant into a clean container.

Drain the engine oil into a clean container before removing the right crankcase cover.

When the right crankcase cover is installed, fill with the recommended engine oil and
coolant. Then, bleed air from the water jacket.

Refer to chapter 17 for A.C. generator inspection.
2.2. Specifications
Engine Oil
SAE 5W/50#
API-SJ Above
Oil Capacity At Change 1.3 L
Coolant Distilled Water + Coolant Concentrate
Coolant Capacity
Coolant radiator 766 cc
Reserve tank 590 cc
Hoses 363 cc
Total 1917 cc
2.3. Special Tools
Flywheel Puller A120E00099
Flywheel Holder A120E00021
2.4. Torque Values
ITEM TORQUE (kgf-m) REMARK
Flywheel Nut 5.5~6.5
One-way Clutch Bolts 1.8~2.2 Apply thread locker
2.5. Troubleshooting
Starter motor rotates but engine does not start

Faulty starter clutch

Starter motor rotates reversely

Weak battery