4
UPON RECEIVING
UNPACKING:
The slicer was inspected before leaving the factory. The carrier assumes full responsibility for
safe delivery upon acceptance of the shipment.
1. Unpack the electric slicer immediately after receipt. If the machine is found to be damaged
after unpacking, save the packaging material and contact carrier and KitchenWare Station
Customer Service Department within seven (7) days of delivery.
2. You should receive the slicer, sharpener, lubricant dispenser, complimentary belt,
complimentary sharpening stone, and an instruction manual. Contact KitchenWare Station
Customer Service Department if you did not receive all of these materials or if you need
additional spare parts.
The electrical cord on this machine is equipped with a three- prong grounding
plug which must be connected to a properly grounded receptacle. If the
receptacle is not the proper grounding type, contact a certified electrician. Do
not remove the grounding prong from the plug.
Le cordon électrique de cette machine est équipé d'une fiche de terre à trois
broches qui doit être connectée à une prise correctement mise à la terre. Si le
type de prise n’est pas correctement mis à la terre, contactez un électricien
agréé. Ne retirez pas la broche de terre de la fiche.
3. Examine slicer to make sure all parts have been provided.
4. Make sure that the instruction manual is available near slicer.
5. Complete the online warranty/registration at: www.kitchenwarestation.com/registration/
6. Before use, clean and sanitize slicer. Refer to Cleaning and Sanitizing.
7. Contact your local representative or KitchenWare Station directly if you have any questions
or problems with the installation or operation of this slicer.