KWS MS-12A Скачать руководство пользователя страница 20

 

20 

 

LIMITED WARRANTY 

Thank you for purchasing KitchenWare Station’s product. This electric slicer was tested and 
meets our stringent quality standards. This product is warrantied to be free from manufacturing 
defects under normal/ proper use and conditions for 1 year- part only. 

To register your warranty for this product, complete the warranty registration form provided in 
the package, and send it back to us. Or register online by visiting 

www.kitchenwarestation.com/registration

If you experience unsatisfactory operation, first refer to the troubleshooting section in the 
manual to ensure that it is not due to care or cleaning.  

If you have any questions or comments, please do not hesitate to Email our customer service 
team: 

[email protected]

 . Please specify the model number and order 

ID so our customer service department can assist you.  

------------------------------------------------------------------------------------------------------------------------------- 

KitchenWare Station’s obligation and liability under this warranty is expressly limited to 
providing parts for equipment that proves to be manufacturing defects under normal/ proper 
use within the applicable warranty period.  

This warranty does not apply to defects due directly or indirectly to fire, water, burglary, 
misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance, punitive 
damages, loss of use, down time, lost profit, improper installation by unauthorized persons, low 
voltage conditions, inadequate wiring or normal wear and tear. Defects mentioned above are 
not manufacturing defects and are strictly the responsibility of the purchaser. Under no 
circumstances will KitchenWare Station be liable for incidental or consequential damages 
resulting from defective products. Seller shall in no event be liable for death, injuries to persons 
or property, or for incidental, contingent, special, or consequential damages arising from the 
use of our products. 

Warranty valid only in the 48 contiguous United States plus the District of Columbia. 
KitchenWare Station reserves the right to change the price and specifications of the equipment 
and/ or material without notice. Prices are F.O.B plant of manufacture. 

Any instructions or warranty included in this manual are based on the latest data available at 
the time of publication. KitchenWare Station reserves the right to make changes or 
improvements at any time without notice. For the most up to date instructions and warranty 
information, please visit our official website.  

To receive warranty instructions and return authorization, please email KitchenWare Station 
Customer Service.  

For more information regarding warranty and limitation, please visit 
www.kitchenwarestation.com/warranty-information/

 

Содержание MS-12A






















Отзывы: