68
Chapter 7 - TV Measuring Range
106 V3.2
PE measurement (Packet Error)
7.2.2.3.9
Short interruptions in the DVB-T signal usually cannot be detected using MER and BER
measurement. They can make entire packets in the transport stream unusable for the MPEG
decoder, however. This can lead to short picture freezes or sound that crackles.
The extent of this depends largely on the receiver hardware.
The measuring receiver has a function were corrupt transport stream packets can be summed from
the point in time of entry of a new channel. This function runs in the background constantly. An
additional window can be shown on the display using the menu item
PE-INFO
. The number of
packet errors (PE = Packet Error) and the amount of time that has passed since the last tuning
process is displayed. Press
ENTER
to close the window again.
Figure 7-15 DVB-T packet error
Picture and sound check
7.2.2.3.10
For digital television, picture and sound decoding take place in the MPEG decoder.
For more, see “- ” section.
Remote supply
7.2.2.3.11
The measuring receiver can provide a remote power supply via the RF input socket for an active
receiving antenna (see also chapter 11.9 - Remote supply).
Constellation diagram
7.2.2.3.12
As soon as the measurement receiver is adjusted, the constellation diagram can be called up by
choosing the menu item
CONST
. Further information can be taken from Chapter 13 - Constellation
