47
Configuring the DIRECTV Receivers for
Automatic Switching
To establish communications between the
TracVision system and each SWM-compatible
DIRECTV receiver for automatic satellite
switching, you need to set each receiver to a static
IP address and enter that address, along with the
receiver's location, in the TV-Hub's web interface.
Static IP Address Range WITHOUT an Onboard Network
If the DECA Broadband Kit is connected directly
to the TV-Hub's "Ethernet" port (no router is
installed), set each receiver's IP address to any
address ranging from
192.168.x.2
to
192.168.x.149
, where
x=1<the last 2 digits in the
TV-Hub’s serial number>
.
For example, if the serial number of the TV-Hub
is 140901484, you might assign an IP address of
192.168.184.2 (see Figure 78). Refer t o the
instructions in
“Assigning Static IP Addresses to
. The TV-Hub
has a hidden IP address of
192.168.x.1
reserved
for automatic switching communications. This IP
address is not shown on the Network Settings
page of the web interface.
Static IP Address Range WITH an Onboard Network
If the TV-Hub and the DECA Broadband Kit are
connected to an onboard network (i.e., router),
set each receiver to a static IP address that is
outside the router's DHCP range (see Figure 79).
(Refer to the router's user manual for details on
finding its IP address range.) For example, if the
router has an IP address of 192.168.1.1 and
assigns IP addresses ranging from 192.168.1.100
to 192.168.1.149 via DHCP, you could set each
receiver's IP address to any address ranging from
192.168.1.150 to 192.168.1.254. Refer to the
instructions in
“Assigning Static IP Addresses to
.
Figure 78: IP Addressing for Automatic Switching (Example)
Wi-Fi
LEN=1
10-30V
POWER
MAX CURRENT 9.5A
NMEA 0183
B
A
FUSE
ETHERNET
DSWM
RECEIVER
GROUND
ANTENNA
RESET
NMEA 2000
DC IN
TV-Hub
AC Power
AC Power
Static IP Address: 192.168.1
84
.2
Receiver #1
SWM Splitter
Static IP Address: 192.168.1
84
.3
Receiver #2
TV-Hub Serial Number
1409014
84
192.168.1
84
.1
TV-Hub IP Address
for Automatic Switching
Can connect via an
onboard network
(router), if desired
AC Power
Power
Supply
DECA
Figure 79: Router DHCP Settings (Example)
Continued
Using a DIRECTV Coax Network
C
Содержание TracVision TV10
Страница 1: ...TracVision TV10 Installation Guide ...
Страница 53: ......
