KVH Industries IP-MOBILECAST, Руководство по установке

Страница: 17 / 31

16
If you installed a Set-top Box, follow these steps
to verify Set-top Box operation.
a. Turn on the TV and select the input that is
connected to the Set-top Box.
b. Before powering on the Set-top Box, make
sure the Media Server has been powered on
for at least 5 minutes to complete its
initialization. The Media Server streams content
to the Set-top Box.
c. Connect the AC-DC adapter to the Set-top
Box to apply power, then allow 7 minutes for
it to initialize. The status light on the front of
the Set-top Box should be lit green (see
Figure 27) and blue progress bars should
appear on the TV screen (see Figure 28).
d. When initialization is complete, press the
PORTAL button on the remote control to
access the menu (see Figure 29).
e. Use the arrows and OK button to select the
TV channel list and browse through the
programming (see Figure 30).
f. Select channel 26 and make sure you can
watch a movie.
If you encounter any problems, refer to
“Troubleshooting” on page 18 . If the problem
persists, contact KVH Technical Support.
Figure 27: Set-top Box Status Light
Set-top Box
Status Light
Figure 28: TV Display of Set-top Box Initialization
Figure 29: Set-top Box Remote Control
Figure 30: Set-top Box IP-MobileCast Onscreen Menu
Testing the Set-top Box
13
If Applicable