Kverneland VF6585 Скачать руководство пользователя | Manualshive

Страница: 68 / 102

background image

Operation

68

Operation

Safety

Observe the safety information

Observe the safety information. Disregard for safety information
can lead to serious or fatal injury. See chapter »Safety«, page 6.

No riding on the machine

Persons or objects must never be transported on the machine.
Carrying passengers on the machine is life-threatening and
prohibited. It can result in serious or even fatal injury.

No persons in the working area

Ensure that no persons are present in the slewing and working
area of the machine. Persons could be caught by the machine
within this area. Serious or fatal injury may be caused as a result.

Maximum PTO stub shaft speed 540 rpm

The PTO stub shaft speed must not exceed 540 rpm and must be
adapted to the condition of the crop. Higher revolution rates can
cause damage to the machine.

Only allow the PTO shaft clutch to respond for a short time

Do not allow the slip clutch to respond for longer than 3 seconds.
If the clutch responds for a longer period of time, it will become
worn and the disconnect torque will drop.

Do not compress the PTO shaft

The PTO shaft between the tractor and machine must not be
compressed when in the work position or transport position. If
compressed, PTO shafts can cause damage to the machine and
tractor.

Observe the contour of the terrain

Pay even more attention when driving on an incline. Avoid inclines
on which the combination (tractor and machine) could slip or
overturn. There is an increased risk of tipping and injury in a
position at right angles to the direction of the slope.

Changes in the centre of gravity

The machine's centre of gravity changes in the single rotor work
position. Pay even more attention when driving on an incline.
Avoid inclines on which the combination (tractor and machine)
could slip or overturn. There is an increased risk of tipping and
injury in a position at right angles to the direction of the slope.

«
...
66
67
68
69
70
...
»

Содержание VF6585







































































































Отзывы:

Нет отзывов

Похожие инструкции для VF6585

Tetrix 351 AC/DC Smart FW

Бренд: EWM Страницы: 117

Бренд: Mandam Страницы: 9

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: M-Audio Страницы: 25

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренд: Park House Healthcare Страницы: 32

Бренд: Jumil Страницы: 78

Бренд: Agilent Technologies Страницы: 114

MT765 Challenger

Бренд: Fast Страницы: 31

Бренд: TDS Fitness Equipment Страницы: 5

Бренд: TC Electronic Страницы: 32

Бренд: ERRECOM Страницы: 2

Бренд: Zoom Страницы: 16

BlitzForce XXLC-33-NH1

Бренд: Task Force Tips Страницы: 16

Бренд: Walimex Pro Страницы: 7

Бренд: CHART Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды