Kverneland VF6585 Скачать руководство пользователя

Страница: 33 / 102

Delivery and assembly

Steering

In addition to the following handling instructions, please also note the
instructions and safety information in the following chapters:



»Coupling the machine«. Page 34.



»Coupling the lower link«, page 35.



»Coupling the PTO shaft«, page 37.

Checking the

steering

The steering is fitted and preset in the factory. Check the adjustment
of the steering with a hitched machine.



Drive along a straight line with the entire combination (tractor with
hitched machine). For example, a straight kerb.



Check if the machine follows the tractor in the same track.

If the machine is pulled at an offset angle behind the tractor, the
tracking must be checked and adjusted. This work must be carried out
by a dealer.

Checking the track

If the machine rolls at an offset angle to the tractor when driving a
straight line, the directional stability is set incorrectly.

Proceed as follows:



See chapter »Checking the track«, page 90.



Consult your dealer. Never carry out any work on the steering or
tracking yourself.

Track arm

Steering arm

Track rod

Steering rod

Содержание VF6585







































































































Результаты поиска

Содержание VF6585

Отзывы:

Похожие инструкции для VF6585

Бренды по названию

Популярные бренды

Kverneland VF6585, Руководство по эксплуатации

Результаты поиска

Содержание VF6585

Отзывы:

Похожие инструкции для VF6585

Бренды по названию

Популярные бренды