Kverneland VF6585 Скачать руководство пользователя

Страница: 46 / 102

Preparing for use

Tine lifting

The time for lifting the tines can be adapted to the crop (early or late
lifting). The control cam can be infinitely adjusted.

To do this, the following steps are required:



Switch off the tractor and secure it.



Remove unrequired tine supports.



Loosen the adjusting screw on the rotor chassis.



Adjust the control cam.

The illustration opposite shows the right rotor. The functions are
identical for the left rotor.



Tighten the adjusting screw.



Fit and secure the tine supports.



Move the adjusting screw in the rotational direction of the rotor:



Late lifting of the tines increases the raking width.



Move the adjusting screw against the rotational direction of the
rotor:



Early lifting of the tines means that the working speed can be
increased.

In the basic setting, the adjusting screw is positioned centrally.

Adjusting screw

Early



lifting

Late



lifting

Содержание VF6585







































































































Результаты поиска

Содержание VF6585

Отзывы:

Похожие инструкции для VF6585

Бренды по названию

Популярные бренды

Kverneland VF6585, Руководство по эксплуатации

Результаты поиска

Содержание VF6585

Отзывы:

Похожие инструкции для VF6585

Бренды по названию

Популярные бренды