Kverneland Qualidisc Farmer Скачать руководство пользователя страница 19

Страница: 19 / 71

Safety

Maintenance

It is strictly prohibited to remove springs used as safety devices for
working parts: this operation should only be performed by specialists.

For machines with folding extensions: You must follow the instructions
in this manual for assembly, disassembly and adjustment.

Before doing any welding:



Disconnect any electrical enclosures.



Disconnect the alternator and battery, if the tractor is hitched to the
tool.

Regularly check that bolts are tight, tire pressures are correct and the

hydraulic circuit is in good condition.

Take care never to direct the jet from a high pressure cleaner directly
at the following parts; it could damage them:

•

bearings

•

hydraulic hoses,

•

electrical enclosures,

•

any sensitive component of the machine.

DANGER

Engage the brakes or vehicle immobilization system before
all interventions on the tractor - tool assembly.

Always engage the brakes or vehicle immobilization system

before any intervention within the radius of the tractor - tool
assembly. Failure to do so could result in serious injury, even
death.

WARNING

Take care with sharp edges and corners.

When changing parts on the machine, pay attention to all parts
with sharp edges or corners. We recommend that you wear safety
equipment (hard hat, safety shoes, gloves, etc.) to avoid any
injury.

CAUTION

Take care with splashback from high pressure cleaners.

When cleaning the machine, take care with splashback from high
pressure cleaners on some surfaces. It could cause superficial
injuries.

Содержание Qualidisc Farmer








































































Результаты поиска

Содержание Qualidisc Farmer

Отзывы:

Похожие инструкции для Qualidisc Farmer

Бренды по названию

Популярные бренды

Kverneland Qualidisc Farmer, Руководство пользователя

Результаты поиска

Содержание Qualidisc Farmer

Отзывы:

Похожие инструкции для Qualidisc Farmer

Бренды по названию

Популярные бренды