Kverneland Qualidisc Farmer Скачать руководство пользователя

Страница: 51 / 71

Unhitching

To avoid clutter, you might prefer storing your machine with the frame
folded using a set of storage support legs. In this case:

Fold back the machine.



Fold up the frame.



Disconnect the electrical cables.



Disconnect the road signals kit connector (if included).



Disconnect the tractor’s hydraulic hoses.



Raise the machine until the clearance is greater than the height of
the storage struts.



Verify that the folding machine parts have been correctly folded

back.

Adjusting the rear struts



While being careful to avoid the protruding ledges, access the rear
struts by the back side of the machine.



Remove the spindles

to unlock the struts.



Lower the struts in order to move them from the working position

to the storage position



Lock the struts using spindles



Leave via the rear of the machine.

Adjust the front struts



Lower the machine onto a stable surface so that its weight is being
supported by the rear struts and that the tension applied on the
upper link is released.



Unhitch the upper link.



Adjust the tractor lifting height in such a way to allow placing the
front struts into the storage position.



Remove the spindles

to unlock the struts.



Lower the struts in order to move them from the working position

to the storage position



Lock the struts using spindles

Store the machine



Lower the machine to a point where the struts are positioned on a
stable and regular surface.



Ensure that there are no obstacles or uneven surface under the
support legs.



Ensure that the machine is positioned parallel to the ground and
the struts are not digging into the floor.



Unhitch the machine.

Содержание Qualidisc Farmer








































































Результаты поиска

Содержание Qualidisc Farmer

Отзывы:

Похожие инструкции для Qualidisc Farmer

Бренды по названию

Популярные бренды

Kverneland Qualidisc Farmer, Руководство пользователя

Результаты поиска

Содержание Qualidisc Farmer

Отзывы:

Похожие инструкции для Qualidisc Farmer

Бренды по названию

Популярные бренды