Kverneland Qualidisc Farmer, Руководство пользователя

Страница: 45 / 71

Adjustments
45
Rollers

Actipack and Actiring
Active knife skids
Introduction
Use this configuration if you want:
•
A levelled, fine tilth finish.
•
To sow immediately after harrowing.
Notes and recommenda-
tions
Adjust the knife skid height D according to the following:
•
The soil characteristics,
•
Light or sandy soil: raised knife skid
•
Heavy, clay soil: knife skid in lower position
•
the type of machine you are using,
•
the position of the attachment arms (varies according to the
working depth).
We recommend exerting the lowest possible pressure on the knife
skids as excessive pressure could cause:
•
An increase in wear on the knife skids,
•
increased traction power requirement,
•
a risk of blockage,
•
etc.
The scrapers C do not have to be adjusted when changing from one
setting to another. The scrapers are only used in the “ OFF ” position to
clean the central tube.
Adjustment procedure

Set the knife skids to position “ 1 ”.

Adjust the working depth of the machine.

Test and check the quality of the finish:

If necessary, gradually increase the pressure on the knife skids
by setting to position “
2 ” or “ 3 ”.
\
DANGER
No one should stand close to the tractor’s controls while the rollers
are being adjusted.
A Rear manifold
B Disc roller
A
B
C
D