Kverneland CLC Evo Скачать руководство пользователя

Страница: 65 / 86

Unhitching

Adjust the front struts



Lower the machine onto a stable surface so that its weight is being
supported by the rear struts and that the tension applied on the
upper link is released.



Unhitch the upper link.



Adjust the tractor lifting height in such a way to allow placing the
front struts into the storage position.



Remove the spindles (A) to unlock the struts.



Lower the struts in order to move them from the working position
(B) to the storage position (C).



Lock the struts using spindles (A).

Store the machine



Lower the machine to a point where the struts are positioned on a
stable and regular surface.



Ensure that there are no obstacles or uneven surface under the
support legs.



Ensure that the machine is positioned parallel to the ground and
the struts are not digging into the floor.



Unhitch the machine.

Содержание CLC Evo























































































Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды

Kverneland CLC Evo, Руководство пользователя

Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды