Kverneland CLC Evo Скачать руководство пользователя

Страница: 55 / 86

Adjustments

Roller arm

The working depth is adjusted using the perforated plates at the rear
and is determined by the shaft positioned above the arm.



Raise the machine so that its weight is no longer being supported
by the roller while ensuring that the roller is still touching the
ground.



Stabilize the machine and the tractor.



Place one foot on the roller beam (C).



Place both hands on the perforated plate (D).



Climb onto the roller beam while holding the perforated plate.



Place your other foot on the beam of the leveling

accessory (E).



Remove the pin locking the lower shaft.



Remove the shaft.



Use the perforated plate to adjust the working depth.



Replace the shaft.



Lock the shaft with the pin.



Climb down from the machine in the same way as when you
climbed onto it, in the reverse order.



Apply the same settings to all the perforated plates.

The sticker opposite is pasted onto the perforated plates to make it
easier to adjust the working depth.

•

The holes in the light gray part are used to adjust the machine for
surface work.

•

The holes in the gray part are used to adjust the machine to work
at a medium depth.

•

The holes in the dark gray part are used to adjust the machine for
deep work.

Adjusting shaft

Perforated plate

Содержание CLC Evo























































































Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды

Kverneland CLC Evo, Руководство пользователя

Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды