Kverneland CLC Evo, Руководство пользователя

Страница: 23 / 86

Safety
23
Maintenance
It is strictly forbidden to disassemble springs used as safety devices
for working parts: This operation must only be performed by
specialists.
For machines fitted with foldable extensions: Strictly follow the instruc-
tions in this user’s manual for the assembly, disassembly and
adjustment.
Before carrying out any welding works:

Disconnect the electrical boxes (if present).

Disconnect the tractor alternator and battery if it is hitched.
Regularly check that bolts are tight, tire pressures are correct and the
hydraulic circuit is in good condition.
Be sure to never direct the high-pressure cleaning jet directly onto the
following components, so as to prevent their deterioration:
•
bearings,
•
hydraulic hoses,
•
electrical boxes
•
any sensitive machine component.
\
HAZARD
Apply the brakes or immobilization system prior to any
actions taken on the tractor-tool assembly.
Be sure to always apply the brakes or the vehicle immobilization
system prior to any action taken within the radius of the tractor-tool
assembly. Failing to do so may cause serious or even fatal
injuries.
\
WARNING
Beware of sharp edges and corners.
When changing parts on the machine, you should pay attention to
all parts with sharp edges or corners. We recommend that you
wear safety equipment (hard hat, safety shoes, gloves, etc.) in
order to avoid any injury.
\
IMPORTANT
Beware of the return path of the high-pressure cleaning jet.
While cleaning the machine, beware of the return path of the high-
pressure cleaning jet on some of the surfaces. This might cause
bruises and contusions.