Kverneland CLC Evo, Руководство пользователя

Страница: 59 / 86

Adjustments
59
Actipack and Actiring
rollers
Active knife skids
Introduction
Use this configuration if you want:
•
A leveled, fine tilth finish.
•
To sow immediately after harrowing.
Notes and recommenda-
tions
Adjust the knife skid height (D) according to the following:
•
The soil characteristics,
•
Light or sandy soil: knife skids raised
•
Heavy, clay soil: knife skids lower
•
the type of machine you are using,
•
the position of the attachment arms (varies according to the
working depth).
We recommend exerting the lowest possible pressure on the knife
skids as excessive pressure could cause:
•
Increased wear of the knife skids,
•
increased traction power requirement,
•
a risk of blockage.
The scrapers (C) do not have to be adjusted when changing from one
setting to another. The scrapers are only used in the OFF position to
clean the central tube.
Adjustment procedure

Set the knife skids to position 1.

Adjust the working depth of the machine.

Test and check the quality of the finish:

If necessary, gradually increase the pressure on the knife skids
by setting to position 2 or 3.
A Rear manifold
B Disc roller
A
B
C
D