40
Adjusting the plough
Skimmer [+]
The skimmers are correctly adjusted when
•
The skimmers have a working depth of approximately 3 to 5 cm.
•
All skimmers are adjusted equally.
150 B
To adjust the depth
> Support the skimmer to prevent it from dropping
> Loosen the nuts on bolt C
> Loosen bolt C, one side at a time
> Adjust the skimmer to the desired position and count the markings
> Retighten bolt (C)
> Tighten the nuts on bolt (C)
To change the forward position
> Support the skimmers
> The skimmer can be adjusted to 3 positions (P)
150 S
Adjusting the depth
> Support the skimmers to prevent them dropping down
> Loosen the nut on bolt C
> Loosen bolt C, one side at a time
> Adjust the skimmers to the desired position, and count the mark
-
ings
> Tighten the bolt again (C)
> Tighten the nut again (C)
Adjusting the forward position
> Loosen the nuts (A) at the same time
> Loosen the nuts (B) at the same time
> Adjust the skimmers to the desired position
> Tighten the nuts again (B)
> Tighten the nuts again (A)
C
C
P
B
C
B
C
A
A