50
Maintenance and care
Replace hoses
Check the length of the hose
Check the length of the hose on the plough for sufficient slack. Overly
taut or stretched hoses can become damaged or broken.
Replace the hydraulic hoses
•
immediately when they have become worn or defective.
•
Every 6 years
> Relieve the pressure in the hydraulic system
> Disconnect the hoses from the tractor
> Remove the old hose.
> Fit the new hose
> Tighten all couplings fully
Replace
wearing parts
•
Replace parts in contact with the soil and other parts when they are
worn or damaged.
•
Use only genuine Kverneland spare parts.
> Remove the old part.
> Fit the new part
> Remove paint from any surfaces in contact with the soil
T
IP
Landsides
When reversible landsides are worn to approximately 5 mm at the
end, they can be reversed from the right to be used on the left hand
side.
T
IP
Reversible point
When reversible points are worn at the end, they can be reversed.
